Amazon Elastic Compute Cloud (EC2)

Accepts an Elastic IP address transfer. For more information, see Accept a transferred Elastic IP address in the Amazon Virtual Private Cloud User Guide.

Accepts the Convertible Reserved Instance exchange quote described in the GetReservedInstancesExchangeQuote call.

Accepts a request to associate subnets with a transit gateway multicast domain.

Accepts a transit gateway peering attachment request. The peering attachment must be in the pendingAcceptance state.

Accepts a request to attach a VPC to a transit gateway. The VPC attachment must be in the pendingAcceptance state. Use DescribeTransitGatewayVpcAttachments to view your pending VPC attachment reque...

Accepts connection requests to your VPC endpoint service.

Accept a VPC peering connection request. To accept a request, the VPC peering connection must be in the pending-acceptance state, and you must be the owner of the peer VPC. Use DescribeVpcPeeringCo...

Advertises an IPv4 or IPv6 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP). You can perform this operation at most once...

Allocates an Elastic IP address to your Amazon Web Services account. After you allocate the Elastic IP address you can associate it with an instance or network interface. After you release an Elast...

Allocates a Dedicated Host to your account. At a minimum, specify the supported instance type or instance family, the Availability Zone in which to allocate the host, and the number of hosts to all...

Allocate a CIDR from an IPAM pool. In IPAM, an allocation is a CIDR assignment from an IPAM pool to another IPAM pool or to a resource. For more information, see Allocate CIDRs in the Amazon VPC IP...

Applies a security group to the association between the target network and the Client VPN endpoint. This action replaces the existing security groups with the specified security groups.

Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assig...

Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP add...

Assigns one or more private IPv4 addresses to a private NAT gateway. For more information, see Work with NAT gateways in the Amazon Virtual Private Cloud User Guide.

Associates an Elastic IP address, or carrier IP address (for instances that are in subnets in Wavelength Zones) with an instance or a network interface. Before you can use an Elastic IP address, yo...

Associates a target network with a Client VPN endpoint. A target network is a subnet in a VPC. You can associate multiple subnets from the same VPC with a Client VPN endpoint. You can associate onl...

Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing inst...

Associates an Identity and Access Management (IAM) role with an Certificate Manager (ACM) certificate. This enables the certificate to be used by the ACM for Nitro Enclaves application inside an en...

Associates an IAM instance profile with a running or stopped instance. You cannot associate more than one IAM instance profile with an instance.

Associates one or more targets with an event window. Only one type of target (instance IDs, Dedicated Host IDs, or tags) can be specified with an event window. For more information, see Define even...

Associates an IPAM resource discovery with an Amazon VPC IPAM. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Associates Elastic IP addresses (EIPs) and private IPv4 addresses with a public NAT gateway. For more information, see Work with NAT gateways in the Amazon Virtual Private Cloud User Guide. By defa...

Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to ...

Associates a CIDR block with your subnet. You can only associate a single IPv6 CIDR block with your subnet. An IPv6 CIDR block must have a prefix length of /64.

Associates the specified subnets and transit gateway attachments with the specified transit gateway multicast domain. The transit gateway attachment must be in the available state before you can ad...

Associates the specified transit gateway attachment with a transit gateway policy table.

Associates the specified attachment with the specified transit gateway route table. You can associate only one route table with an attachment.

This API action is currently in limited preview only. If you are interested in using this feature, contact your account manager. Associates a branch network interface with a trunk network interfa...

Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned throug...

We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon Elastic Compute Cloud User Guide. L...

Attaches an internet gateway or a virtual private gateway to a VPC, enabling connectivity between the internet and the VPC. For more information about your VPC and internet gateway, see the Amazon ...

Attaches a network interface to an instance.

A trust provider is a third-party entity that creates, maintains, and manages identity information for users and devices. One or more trust providers can be attached to an Amazon Web Services Verif...

Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name. Encrypted EBS volumes must be attached to instances that support Amazon EBS en...

Attaches a virtual private gateway to a VPC. You can attach one virtual private gateway to one VPC at a time. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Servic...

Adds an ingress authorization rule to a Client VPN endpoint. Ingress authorization rules act as firewall rules that grant access to networks. You must configure ingress authorization rules to enabl...

[VPC only] Adds the specified outbound (egress) rules to a security group for use with a VPC. An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 CIDR address ranges, o...

Adds the specified inbound (ingress) rules to a security group. An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 CIDR address range, or from the instances that a...

Bundles an Amazon instance store-backed Windows instance. During bundling, only the root device volume (C:\) is bundled. Data on other instance store volumes is not preserved. This action is not ap...

Cancels a bundling operation for an instance store-backed Windows instance.

Cancels the specified Capacity Reservation, releases the reserved capacity, and changes the Capacity Reservation's state to cancelled. Instances running in the reserved capacity continue running un...

Cancels one or more Capacity Reservation Fleets. When you cancel a Capacity Reservation Fleet, the following happens: The Capacity Reservation Fleet's status changes to cancelled. The individual Ca...

Cancels an active conversion task. The task can be the import of an instance or volume. The action removes all artifacts of the conversion, including a partially uploaded volume or instance. If the...

Cancels an active export task. The request removes all artifacts of the export, including any partially-created Amazon S3 objects. If the export task is complete or is in the process of transferrin...

Removes your Amazon Web Services account from the launch permissions for the specified AMI. For more information, see Cancel having an AMI shared with your Amazon Web Services account in the Amazo...

Cancels an in-process import virtual machine or import snapshot task.

Cancels the specified Reserved Instance listing in the Reserved Instance Marketplace. For more information, see Reserved Instance Marketplace in the Amazon EC2 User Guide.

Cancels the specified Spot Fleet requests. After you cancel a Spot Fleet request, the Spot Fleet launches no new instances. You must also specify whether a canceled Spot Fleet request should termin...

Cancels one or more Spot Instance requests. Canceling a Spot Instance request does not terminate running Spot Instances associated with the request.

Determines whether a product code is associated with an instance. This action can only be used by the owner of the product code. It is useful when a product code owner must verify whether another u...

Copies the specified Amazon FPGA Image (AFI) to the current Region.

Initiates the copy of an AMI. You can copy an AMI from one Region to another, or from a Region to an Outpost. You can't copy an AMI from an Outpost to a Region, from one Outpost to another, or with...

Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't co...

Creates a new Capacity Reservation with the specified attributes. Capacity Reservations enable you to reserve capacity for your Amazon EC2 instances in a specific Availability Zone for any duration...

Creates a Capacity Reservation Fleet. For more information, see Create a Capacity Reservation Fleet in the Amazon EC2 User Guide.

Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the Amazon Web Services Wavelength Developer Guide.

Creates a Client VPN endpoint. A Client VPN endpoint is the resource you create and configure to enable and manage client VPN sessions. It is the destination endpoint at which all client VPN sessio...

Adds a route to a network to a Client VPN endpoint. Each Client VPN endpoint has a route table that describes the available destination network routes. Each route in the route table specifies the p...

Creates a range of customer-owned IP addresses.

Creates a pool of customer-owned IP (CoIP) addresses.

Provides information to Amazon Web Services about your customer gateway device. The customer gateway device is the appliance at your end of the VPN connection. You must provide the IP address of th...

Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, se...

Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and default subnets...

Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP opt...

IPv6 only Creates an egress-only internet gateway for your VPC. An egress-only internet gateway is used to enable outbound communication over IPv6 from instances in your VPC to the internet, and pr...

Launches an EC2 Fleet. You can create a single EC2 Fleet that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. For more information, see EC2 Fl...

Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC. Flow log data for a monitored network interface is recorded as flow log recor...

Creates an Amazon FPGA Image (AFI) from the specified design checkpoint (DCP). The create operation is asynchronous. To verify that the AFI is ready for use, check the output logs. An AFI contains ...

Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped. By default, when Amazon EC2 creates the new AMI, it reboots the instance so that it can take s...

Creates an event window in which scheduled events for the associated Amazon EC2 instances can run. You can define either a set of time ranges or a cron expression when creating the event window, bu...

Exports a running or stopped instance to an Amazon S3 bucket. For information about the supported operating systems, image formats, and known limitations for the types of instances you can export, ...

Creates an internet gateway for use with a VPC. After creating the internet gateway, you attach it to a VPC using AttachInternetGateway. For more information about your VPC and internet gateway, se...

Create an IPAM. Amazon VPC IP Address Manager (IPAM) is a VPC feature that you can use to automate your IP address management workflows including assigning, tracking, troubleshooting, and auditing ...

Create an IP address pool for Amazon VPC IP Address Manager (IPAM). In IPAM, a pool is a collection of contiguous IP addresses CIDRs. Pools enable you to organize your IP addresses according to you...

Creates an IPAM resource discovery. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Create an IPAM scope. In IPAM, a scope is the highest-level container within IPAM. An IPAM contains two default scopes. Each scope represents the IP space for a single network. The private scope is...

Creates an ED25519 or 2048-bit RSA key pair with the specified name and in the specified PEM or PPK format. Amazon EC2 stores the public key and displays the private key for you to save to a file. ...

Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing th...

Creates a new version of a launch template. You can specify an existing version of launch template from which to base the new version. Launch template versions are numbered in the order in which th...

Creates a static route for the specified local gateway route table. You must specify one of the following targets: LocalGatewayVirtualInterfaceGroupId NetworkInterfaceId

Creates a local gateway route table.

Creates a local gateway route table virtual interface group association.

Associates the specified VPC with the specified local gateway route table.

Creates a managed prefix list. You can specify one or more entries for the prefix list. Each entry consists of a CIDR block and an optional description.

Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create eith...

Creates a network ACL in a VPC. Network ACLs provide an optional layer of security (in addition to security groups) for the instances in your VPC. For more information, see Network ACLs in the Amaz...

Creates an entry (a rule) in a network ACL with the specified rule number. Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether...

Creates a Network Access Scope. Amazon Web Services Network Access Analyzer enables cloud networking and cloud operations teams to verify that their networks on Amazon Web Services conform to their...

Creates a path to analyze for reachability. Reachability Analyzer enables you to analyze and debug network reachability between two resources in your virtual private cloud (VPC). For more informati...

Creates a network interface in the specified subnet. The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Ins...

Grants an Amazon Web Services-authorized account permission to attach the specified network interface to an instance in their account. You can grant permission to a single Amazon Web Services accou...

Creates a placement group in which to launch instances. The strategy of the placement group determines how the instances are organized within the group. A cluster placement group is a logical group...

Creates a public IPv4 address pool. A public IPv4 pool is an EC2 IP address pool required for the public IPv4 CIDRs that you own and bring to Amazon Web Services to manage with IPAM. IPv6 addresses...

Replaces the EBS-backed root volume for a running instance with a new volume that is restored to the original root volume's launch state, that is restored to a specific snapshot taken from the orig...

Creates a listing for Amazon EC2 Standard Reserved Instances to be sold in the Reserved Instance Marketplace. You can submit one Standard Reserved Instance listing at a time. To get a list of your ...

Starts a task that restores an AMI from an Amazon S3 object that was previously created by using CreateStoreImageTask. To use this API, you must have the required permissions. For more information,...

Creates a route in a route table within a VPC. You must specify either a destination CIDR block or a prefix list ID. You must also specify exactly one of the resources from the parameter list. When...

Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route tables in the Amazon Virtual P...

Creates a security group. A security group acts as a virtual firewall for your instance to control inbound and outbound traffic. For more information, see Amazon EC2 security groups in the Amazon E...

Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance. You can create s...

Creates crash-consistent snapshots of multiple EBS volumes and stores the data in S3. Volumes are chosen by specifying an instance. Any attached volumes will produce one snapshot each that is crash...

Creates a data feed for Spot Instances, enabling you to view Spot Instance usage logs. You can create one data feed per Amazon Web Services account. For more information, see Spot Instance data fee...

Stores an AMI as a single object in an Amazon S3 bucket. To use this API, you must have the required permissions. For more information, see Permissions for storing and restoring AMIs using Amazon S...

Creates a subnet in the specified VPC. For an IPv4 only subnet, specify an IPv4 CIDR block. If the VPC has an IPv6 CIDR block, you can create an IPv6 only subnet or a dual stack subnet instead. For...

Creates a subnet CIDR reservation. For information about subnet CIDR reservations, see Subnet CIDR reservations in the Amazon Virtual Private Cloud User Guide.

Adds or overwrites only the specified tags for the specified Amazon EC2 resource or resources. When you specify an existing tag key, the value is overwritten with the new value. Each resource can h...

Creates a Traffic Mirror filter. A Traffic Mirror filter is a set of rules that defines the traffic to mirror. By default, no traffic is mirrored. To mirror traffic, use CreateTrafficMirrorFilterRu...

Creates a Traffic Mirror filter rule. A Traffic Mirror rule defines the Traffic Mirror source traffic to mirror. You need the Traffic Mirror filter ID when you create the rule.

Creates a Traffic Mirror session. A Traffic Mirror session actively copies packets from a Traffic Mirror source to a Traffic Mirror target. Create a filter, and then assign it to the session to def...

Creates a target for your Traffic Mirror session. A Traffic Mirror target is the destination for mirrored traffic. The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) ca...

Creates a transit gateway. You can use a transit gateway to interconnect your virtual private clouds (VPC) and on-premises networks. After the transit gateway enters the available state, you can at...

Creates a Connect attachment from a specified transit gateway attachment. A Connect attachment is a GRE-based tunnel attachment that you can use to establish a connection between a transit gateway ...

Creates a Connect peer for a specified transit gateway Connect attachment between a transit gateway and an appliance. The peer address and transit gateway address must be the same IP address family...

Creates a multicast domain using the specified transit gateway. The transit gateway must be in the available state before you create a domain. Use DescribeTransitGateways to see the state of transi...

Requests a transit gateway peering attachment between the specified transit gateway (requester) and a peer transit gateway (accepter). The peer transit gateway can be in your account or a different...

Creates a transit gateway policy table.

Creates a reference (route) to a prefix list in a specified transit gateway route table.

Creates a static route for the specified transit gateway route table.

Creates a route table for the specified transit gateway.

Advertises a new transit gateway route table.

Attaches the specified VPC to the specified transit gateway. If you attach a VPC with a CIDR range that overlaps the CIDR range of a VPC that is already attached, the new VPC CIDR range is not prop...

An Amazon Web Services Verified Access endpoint is where you define your application along with an optional endpoint-level access policy.

An Amazon Web Services Verified Access group is a collection of Amazon Web Services Verified Access endpoints who's associated applications have similar security requirements. Each instance within ...

An Amazon Web Services Verified Access instance is a regional entity that evaluates application requests and grants access only when your security requirements are met.

A trust provider is a third-party entity that creates, maintains, and manages identity information for users and devices. When an application request is made, the identity information sent by the t...

Creates an EBS volume that can be attached to an instance in the same Availability Zone. You can create a new empty volume or restore a volume from an EBS snapshot. Any Amazon Web Services Marketpl...

Creates a VPC with the specified CIDR blocks. For more information, see VPC CIDR blocks in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. Yo...

Creates a VPC endpoint for a specified service. An endpoint enables you to create a private connection between your VPC and the service. The service may be provided by Amazon Web Services, an Amazo...

Creates a connection notification for a specified VPC endpoint or VPC endpoint service. A connection notification notifies you of specific endpoint events. You must create an SNS topic to receive n...

Creates a VPC endpoint service to which service consumers (Amazon Web Services accounts, users, and IAM roles) can connect. Before you create an endpoint service, you must create one of the followi...

Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another Amazon Web Services ...

Creates a VPN connection between an existing virtual private gateway or transit gateway and a customer gateway. The supported connection type is ipsec.1. The response includes information that you ...

Creates a static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private...

Creates a virtual private gateway. A virtual private gateway is the endpoint on the VPC side of your VPN connection. You can create a virtual private gateway before creating the VPC itself. For mor...

Deletes a carrier gateway. If you do not delete the route that contains the carrier gateway as the Target, the route is a blackhole route. For information about how to delete a route, see DeleteRoute.

Deletes the specified Client VPN endpoint. You must disassociate all target networks before you can delete a Client VPN endpoint.

Deletes a route from a Client VPN endpoint. You can only delete routes that you manually added using the CreateClientVpnRoute action. You cannot delete routes that were automatically added when ass...

Deletes a range of customer-owned IP addresses.

Deletes a pool of customer-owned IP (CoIP) addresses.

Deletes the specified customer gateway. You must delete the VPN connection before you can delete the customer gateway.

Deletes the specified set of DHCP options. You must disassociate the set of DHCP options before you can delete it. You can disassociate the set of DHCP options by associating either a new set of op...

Deletes an egress-only internet gateway.

Deletes the specified EC2 Fleets. After you delete an EC2 Fleet, it launches no new instances. You must also specify whether a deleted EC2 Fleet should terminate its instances. If you choose to ter...

Deletes one or more flow logs.

Deletes the specified Amazon FPGA Image (AFI).

Deletes the specified event window. For more information, see Define event windows for scheduled events in the Amazon EC2 User Guide.

Deletes the specified internet gateway. You must detach the internet gateway from the VPC before you can delete it.

Delete an IPAM. Deleting an IPAM removes all monitored data associated with the IPAM including the historical data for CIDRs. For more information, see Delete an IPAM in the Amazon VPC IPAM User Gu...

Delete an IPAM pool. You cannot delete an IPAM pool if there are allocations in it or CIDRs provisioned to it. To release allocations, see ReleaseIpamPoolAllocation. To deprovision pool CIDRs, see ...

Deletes an IPAM resource discovery. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Delete the scope for an IPAM. You cannot delete the default scopes. For more information, see Delete a scope in the Amazon VPC IPAM User Guide.

Deletes the specified key pair, by removing the public key from Amazon EC2.

Deletes a launch template. Deleting a launch template deletes all of its versions.

Deletes one or more versions of a launch template. You cannot delete the default version of a launch template; you must first assign a different version as the default. If the default version is th...

Deletes the specified route from the specified local gateway route table.

Deletes a local gateway route table.

Deletes a local gateway route table virtual interface group association.

Deletes the specified association between a VPC and local gateway route table.

Deletes the specified managed prefix list. You must first remove all references to the prefix list in your resources.

Deletes the specified NAT gateway. Deleting a public NAT gateway disassociates its Elastic IP address, but does not release the address from your account. Deleting a NAT gateway does not delete any...

Deletes the specified network ACL. You can't delete the ACL if it's associated with any subnets. You can't delete the default network ACL.

Deletes the specified ingress or egress entry (rule) from the specified network ACL.

Deletes the specified Network Access Scope.

Deletes the specified Network Access Scope analysis.

Deletes the specified network insights analysis.

Deletes the specified path.

Deletes the specified network interface. You must detach the network interface before you can delete it.

Deletes a permission for a network interface. By default, you cannot delete the permission if the account for which you're removing the permission has attached the network interface to an instance....

Deletes the specified placement group. You must terminate all instances in the placement group before you can delete the placement group. For more information, see Placement groups in the Amazon EC...

Delete a public IPv4 pool. A public IPv4 pool is an EC2 IP address pool required for the public IPv4 CIDRs that you own and bring to Amazon Web Services to manage with IPAM. IPv6 addresses you brin...

Deletes the queued purchases for the specified Reserved Instances.

Deletes the specified route from the specified route table.

Deletes the specified route table. You must disassociate the route table from any subnets before you can delete it. You can't delete the main route table.

Deletes a security group. If you attempt to delete a security group that is associated with an instance, or is referenced by another security group, the operation fails with InvalidGroup.InUse in E...

Deletes the specified snapshot. When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved i...

Deletes the data feed for Spot Instances.

Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.

Deletes a subnet CIDR reservation.

Deletes the specified set of tags from the specified set of resources. To list the current tags, use DescribeTags. For more information about tags, see Tag your Amazon EC2 resources in the Amazon E...

Deletes the specified Traffic Mirror filter. You cannot delete a Traffic Mirror filter that is in use by a Traffic Mirror session.

Deletes the specified Traffic Mirror rule.

Deletes the specified Traffic Mirror session.

Deletes the specified Traffic Mirror target. You cannot delete a Traffic Mirror target that is in use by a Traffic Mirror session.

Deletes the specified transit gateway.

Deletes the specified Connect attachment. You must first delete any Connect peers for the attachment.

Deletes the specified Connect peer.

Deletes the specified transit gateway multicast domain.

Deletes a transit gateway peering attachment.

Deletes the specified transit gateway policy table.

Deletes a reference (route) to a prefix list in a specified transit gateway route table.

Deletes the specified route from the specified transit gateway route table.

Deletes the specified transit gateway route table. You must disassociate the route table from any transit gateway route tables before you can delete it.

Advertises to the transit gateway that a transit gateway route table is deleted.

Deletes the specified VPC attachment.

Delete an Amazon Web Services Verified Access endpoint.

Delete an Amazon Web Services Verified Access group.

Delete an Amazon Web Services Verified Access instance.

Delete an Amazon Web Services Verified Access trust provider.

Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance). The volume can remain in the deleting state for several minutes. For more information, see...

Deletes the specified VPC. You must detach or delete all gateways and resources that are associated with the VPC before you can delete it. For example, you must terminate all instances running in t...

Deletes the specified VPC endpoint connection notifications.

Deletes the specified VPC endpoints. When you delete a gateway endpoint, we delete the endpoint routes in the route tables for the endpoint. When you delete a Gateway Load Balancer endpoint, we del...

Deletes the specified VPC endpoint service configurations. Before you can delete an endpoint service configuration, you must reject any Available or PendingAcceptance interface endpoint connections...

Deletes a VPC peering connection. Either the owner of the requester VPC or the owner of the accepter VPC can delete the VPC peering connection if it's in the active state. The owner of the requeste...

Deletes the specified VPN connection. If you're deleting the VPC and its associated components, we recommend that you detach the virtual private gateway from the VPC and delete the VPC before delet...

Deletes the specified static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the vir...

Deletes the specified virtual private gateway. You must first detach the virtual private gateway from the VPC. Note that you don't need to delete the virtual private gateway if you plan to delete a...

Releases the specified address range that you provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool. Bef...

Deprovision a CIDR provisioned from an IPAM pool. If you deprovision a CIDR from a pool that has a source pool, the CIDR is recycled back into the source pool. For more information, see Deprovision...

Deprovision a CIDR from a public IPv4 pool.

Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances. If you deregister an AMI that matches a Recycle Bin retention rule, the AMI is retained in the ...

Deregisters tag keys to prevent tags that have the specified tag keys from being included in scheduled event notifications for resources in the Region.

Deregisters the specified members (network interfaces) from the transit gateway multicast group.

Deregisters the specified sources (network interfaces) from the transit gateway multicast group.

Describes attributes of your Amazon Web Services account. The following are the supported account attributes: supported-platforms: Indicates whether your account can launch instances into EC2-Class...

Describes the specified Elastic IP addresses or all of your Elastic IP addresses. An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more information, see Elastic ...

Describes the attributes of the specified Elastic IP addresses. For requirements, see Using reverse DNS for email applications.

Describes an Elastic IP address transfer. For more information, see Transfer Elastic IP addresses in the Amazon Virtual Private Cloud User Guide.

Describes the longer ID format settings for all resource types in a specific Region. This request is useful for performing a quick audit to determine whether a specific Region is fully opted in for...

Describes the Availability Zones, Local Zones, and Wavelength Zones that are available to you. If there is an event impacting a zone, you can use this request to view the state and any provided mes...

Describes the current Infrastructure Performance metric subscriptions.

Describes the specified bundle tasks or all of your bundle tasks. Completed bundle tasks are listed for only a limited time. If your bundle task is no longer in the list, you can still register an ...

Describes the IP address ranges that were specified in calls to ProvisionByoipCidr. To describe the address pools that were created when you provisioned the address ranges, use DescribePublicIpv4Po...

Describes one or more Capacity Reservation Fleets.

Describes one or more of your Capacity Reservations. The results describe only the Capacity Reservations in the Amazon Web Services Region that you're currently using.

Describes one or more of your carrier gateways.

Describes one or more of your linked EC2-Classic instances. This request only returns information about EC2-Classic instances linked to a VPC through ClassicLink. You cannot use this request to ret...

Describes the authorization rules for a specified Client VPN endpoint.

Describes active client connections and connections that have been terminated within the last 60 minutes for the specified Client VPN endpoint.

Describes one or more Client VPN endpoints in the account.

Describes the routes for the specified Client VPN endpoint.

Describes the target networks associated with the specified Client VPN endpoint.

Describes the specified customer-owned address pools or all of your customer-owned address pools.

Describes the specified conversion tasks or all your conversion tasks. For more information, see the VM Import/Export User Guide. For information about the import manifest referenced by this API ac...

Describes one or more of your VPN customer gateways. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

Describes one or more of your DHCP options sets. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.

Describes one or more of your egress-only internet gateways.

Describes the Elastic Graphics accelerator associated with your instances. For more information about Elastic Graphics, see Amazon Elastic Graphics.

Describes the specified export image tasks or all of your export image tasks.

Describes the specified export instance tasks or all of your export instance tasks.

Describe details for Windows AMIs that are configured for faster launching.

Describes the state of fast snapshot restores for your snapshots.

Describes the events for the specified EC2 Fleet during the specified time. EC2 Fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query by the las...

Describes the running instances for the specified EC2 Fleet. For more information, see Monitor your EC2 Fleet in the Amazon EC2 User Guide.

Describes the specified EC2 Fleets or all of your EC2 Fleets. For more information, see Monitor your EC2 Fleet in the Amazon EC2 User Guide.

Describes one or more flow logs. To view the published flow log records, you must view the log destination. For example, the CloudWatch Logs log group, the Amazon S3 bucket, or the Kinesis Data Fir...

Describes the specified attribute of the specified Amazon FPGA Image (AFI).

Describes the Amazon FPGA Images (AFIs) available to you. These include public AFIs, private AFIs that you own, and AFIs owned by other Amazon Web Services accounts for which you have load permissi...

Describes the Dedicated Host reservations that are available to purchase. The results describe all of the Dedicated Host reservation offerings, including offerings that might not match the instance...

Describes reservations that are associated with Dedicated Hosts in your account.

Describes the specified Dedicated Hosts or all your Dedicated Hosts. The results describe only the Dedicated Hosts in the Region you're currently using. All listed instances consume capacity on you...

Describes your IAM instance profile associations.

Describes the ID format settings for resources for the specified IAM user, IAM role, or root user. For example, you can view the resource types that are enabled for longer IDs. This request only re...

Describes the ID format settings for your resources on a per-Region basis, for example, to view which resource types are enabled for longer IDs. This request only returns information about resource...

Describes the specified attribute of the specified AMI. You can specify only one attribute at a time.

Describes the specified images (AMIs, AKIs, and ARIs) available to you or all of the images available to you. The images available to you include public images, private images that you own, and pri...

Displays details about an import virtual machine or import snapshot tasks that are already created.

Describes your import snapshot tasks.

Describes the specified attribute of the specified instance. You can specify only one attribute at a time. Valid attribute values are: instanceType | kernel | ramdisk | userData | disableApiTermina...

Describes the credit option for CPU usage of the specified burstable performance instances. The credit options are standard and unlimited. If you do not specify an instance ID, Amazon EC2 returns b...

Describes the tag keys that are registered to appear in scheduled event notifications for resources in the current Region.

Describes the specified event windows or all event windows. If you specify event window IDs, the output includes information for only the specified event windows. If you specify filters, the output...

Describes the specified instances or all instances. If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the output includes inform...

Describes the status of the specified instances or all of your instances. By default, only running instances are described, unless you specifically indicate to return the status of all instances. I...

Returns a list of all instance types offered. The results can be filtered by location (Region or Availability Zone). If no location is specified, the instance types offered in the current Region ar...

Describes the details of the instance types that are offered in a location. The results can be filtered by the attributes of the instance types.

Describes one or more of your internet gateways.

Get information about your IPAM pools.

Describes IPAM resource discoveries. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Describes resource discovery association with an Amazon VPC IPAM. An associated resource discovery is a resource discovery that has been associated with an IPAM..

Get information about your IPAM pools. For more information, see What is IPAM? in the Amazon VPC IPAM User Guide.

Get information about your IPAM scopes.

Describes your IPv6 address pools.

Describes the specified key pairs or all of your key pairs. For more information about key pairs, see Amazon EC2 key pairs in the Amazon Elastic Compute Cloud User Guide.

Describes one or more launch templates.

Describes one or more versions of a specified launch template. You can describe all versions, individual versions, or a range of versions. You can also describe all the latest versions or all the d...

Describes one or more local gateway route tables. By default, all local gateway route tables are described. Alternatively, you can filter the results.

Describes the associations between virtual interface groups and local gateway route tables.

Describes the specified associations between VPCs and local gateway route tables.

Describes one or more local gateways. By default, all local gateways are described. Alternatively, you can filter the results.

Describes the specified local gateway virtual interface groups.

Describes the specified local gateway virtual interfaces.

Describes your managed prefix lists and any Amazon Web Services-managed prefix lists. To view the entries for your prefix list, use GetManagedPrefixListEntries.

Describes your Elastic IP addresses that are being moved to the EC2-VPC platform, or that are being restored to the EC2-Classic platform. This request does not return information about any other El...

Describes one or more of your NAT gateways.

Describes one or more of your network ACLs. For more information, see Network ACLs in the Amazon Virtual Private Cloud User Guide.

Describes the specified Network Access Scope analyses.

Describes the specified Network Access Scopes.

Describes one or more of your network insights analyses.

Describes one or more of your paths.

Describes a network interface attribute. You can specify only one attribute at a time.

Describes the permissions for your network interfaces.

Describes one or more of your network interfaces.

Describes the specified placement groups or all of your placement groups. For more information, see Placement groups in the Amazon EC2 User Guide.

Describes available Amazon Web Services services in a prefix list format, which includes the prefix list name and prefix list ID of the service and the IP address range for the service. We recommen...

Describes the ID format settings for the root user and all IAM roles and IAM users that have explicitly specified a longer ID (17-character ID) preference. By default, all IAM roles and IAM users d...

Describes the specified IPv4 address pools.

Describes the Regions that are enabled for your account, or all Regions. For a list of the Regions supported by Amazon EC2, see Amazon Elastic Compute Cloud endpoints and quotas. For information ab...

Describes a root volume replacement task. For more information, see Replace a root volume in the Amazon Elastic Compute Cloud User Guide.

Describes one or more of the Reserved Instances that you purchased. For more information about Reserved Instances, see Reserved Instances in the Amazon EC2 User Guide.

Describes your account's Reserved Instance listings in the Reserved Instance Marketplace. The Reserved Instance Marketplace matches sellers who want to resell Reserved Instance capacity that they n...

Describes the modifications made to your Reserved Instances. If no parameter is specified, information about all your Reserved Instances modification requests is returned. If a modification ID is s...

Describes Reserved Instance offerings that are available for purchase. With Reserved Instances, you purchase the right to launch instances for a period of time. During that time period, you do not ...

Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated...

Finds available schedules that meet the specified criteria. You can search for an available schedule no more than 3 months in advance. You must meet the minimum required duration of 1,200 hours per...

Describes the specified Scheduled Instances or all your Scheduled Instances.

VPC only Describes the VPCs on the other side of a VPC peering connection that are referencing the security groups you've specified in this request.

Describes one or more of your security group rules.

Describes the specified security groups or all of your security groups. A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. For more information, see...

Describes the specified attribute of the specified snapshot. You can specify only one attribute at a time. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic C...

Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and pri...

Describes the storage tier status of one or more Amazon EBS snapshots.

Describes the data feed for Spot Instances. For more information, see Spot Instance data feed in the Amazon EC2 User Guide for Linux Instances.

Describes the running instances for the specified Spot Fleet.

Describes the events for the specified Spot Fleet request during the specified time. Spot Fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query ...

Describes your Spot Fleet requests. Spot Fleet requests are deleted 48 hours after they are canceled and their instances are terminated.

Describes the specified Spot Instance requests. You can use DescribeSpotInstanceRequests to find a running Spot Instance by examining the response. If the status of the Spot Instance is fulfilled, ...

Describes the Spot price history. For more information, see Spot Instance pricing history in the Amazon EC2 User Guide for Linux Instances. When you specify a start and end time, the operation retu...

VPC only Describes the stale security group rules for security groups in a specified VPC. Rules are stale when they reference a deleted security group in the same VPC or in a peer VPC, or if they r...

Describes the progress of the AMI store tasks. You can describe the store tasks for specified AMIs. If you don't specify the AMIs, you get a paginated list of store tasks from the last 31 days. For...

Describes one or more of your subnets. For more information, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.

Describes the specified tags for your EC2 resources. For more information about tags, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.

Describes one or more Traffic Mirror filters.

Describes one or more Traffic Mirror sessions. By default, all Traffic Mirror sessions are described. Alternatively, you can filter the results.

Information about one or more Traffic Mirror targets.

Describes one or more attachments between resources and transit gateways. By default, all attachments are described. Alternatively, you can filter the results by attachment ID, attachment state, re...

Describes one or more Connect peers.

Describes one or more Connect attachments.

Describes one or more transit gateway multicast domains.

Describes your transit gateway peering attachments.

Describes one or more transit gateway route policy tables.

Describes one or more transit gateway route table advertisements.

Describes one or more transit gateway route tables. By default, all transit gateway route tables are described. Alternatively, you can filter the results.

Describes one or more transit gateways. By default, all transit gateways are described. Alternatively, you can filter the results.

Describes one or more VPC attachments. By default, all VPC attachments are described. Alternatively, you can filter the results.

This API action is currently in limited preview only. If you are interested in using this feature, contact your account manager. Describes one or more network interface trunk associations.

Describe Amazon Web Services Verified Access endpoints.

Describe details of existing Verified Access groups.

Describes the current logging configuration for the Amazon Web Services Verified Access instances.

Describe Verified Access instances.

Describe details of existing Verified Access trust providers.

Describes the specified attribute of the specified volume. You can specify only one attribute at a time. For more information about EBS volumes, see Amazon EBS volumes in the Amazon Elastic Compute...

Describes the specified EBS volumes or all of your EBS volumes. If you are describing a long list of volumes, we recommend that you paginate the output to make the list more manageable. For more in...

Describes the most recent volume modification request for the specified EBS volumes. If a volume has never been modified, some information in the output will be null. If a volume has been modified ...

Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The per...

Describes the specified attribute of the specified VPC. You can specify only one attribute at a time.

Describes the ClassicLink status of one or more VPCs. We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a V...

We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon Elastic Compute Cloud User Guide. D...

Describes the connection notifications for VPC endpoints and VPC endpoint services.

Describes the VPC endpoint connections to your VPC endpoint services, including any endpoints that are pending your acceptance.

Describes your VPC endpoints.

Describes the VPC endpoint service configurations in your account (your services).

Describes the principals (service consumers) that are permitted to discover your VPC endpoint service.

Describes available services to which you can create a VPC endpoint. When the service provider and the consumer have different accounts in multiple Availability Zones, and the consumer views the VP...

Describes one or more of your VPC peering connections.

Describes one or more of your VPCs.

Describes one or more of your VPN connections. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

Describes one or more of your virtual private gateways. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon Elastic Compute Cloud User Guide. U...

Detaches an internet gateway from a VPC, disabling connectivity between the internet and the VPC. The VPC must not contain any running instances with Elastic IP addresses or public IPv4 addresses.

Detaches a network interface from an instance.

Detach a trust provider from an Amazon Web Services Verified Access instance.

Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume beco...

Detaches a virtual private gateway from a VPC. You do this if you're planning to turn off the VPC and not use it anymore. You can confirm a virtual private gateway has been completely detached from...

Disables Elastic IP address transfer. For more information, see Transfer Elastic IP addresses in the Amazon Virtual Private Cloud User Guide.

Disables Infrastructure Performance metric subscriptions.

Disables EBS encryption by default for your account in the current Region. After you disable encryption by default, you can still create encrypted volumes by enabling encryption when you create eac...

Discontinue faster launching for a Windows AMI, and clean up existing pre-provisioned snapshots. When you disable faster launching, the AMI uses the standard launch process for each instance. All p...

Disables fast snapshot restores for the specified snapshots in the specified Availability Zones.

Cancels the deprecation of the specified AMI. For more information, see Deprecate an AMI in the Amazon EC2 User Guide.

Disable the IPAM account. For more information, see Enable integration with Organizations in the Amazon VPC IPAM User Guide.

Disables access to the EC2 serial console of all instances for your account. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account acce...

Disables the specified resource attachment from propagating routes to the specified propagation route table.

Disables a virtual private gateway (VGW) from propagating routes to a specified route table of a VPC.

Disables ClassicLink for a VPC. You cannot disable ClassicLink for a VPC that has EC2-Classic instances linked to it. We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to ...

Disables ClassicLink DNS support for a VPC. If disabled, DNS hostnames resolve to public IP addresses when addressed between a linked EC2-Classic instance and instances in the VPC to which it's lin...

Disassociates an Elastic IP address from the instance or network interface it's associated with. An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more informatio...

Disassociates a target network from the specified Client VPN endpoint. When you disassociate the last target network from a Client VPN, the following happens: The route that was automatically added...

Disassociates an IAM role from an Certificate Manager (ACM) certificate. Disassociating an IAM role from an ACM certificate removes the Amazon S3 object that contains the certificate, certificate c...

Disassociates an IAM instance profile from a running or stopped instance. Use DescribeIamInstanceProfileAssociations to get the association ID.

Disassociates one or more targets from an event window. For more information, see Define event windows for scheduled events in the Amazon EC2 User Guide.

Disassociates a resource discovery from an Amazon VPC IPAM. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Disassociates secondary Elastic IP addresses (EIPs) from a public NAT gateway. You cannot disassociate your primary EIP. For more information, see Edit secondary IP address associations in the Amaz...

Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route tab...

Disassociates a CIDR block from a subnet. Currently, you can disassociate an IPv6 CIDR block only. You must detach or delete all gateways and resources that are associated with the CIDR block befor...

Disassociates the specified subnets from the transit gateway multicast domain.

Removes the association between an an attachment and a policy table.

Disassociates a resource attachment from a transit gateway route table.

This API action is currently in limited preview only. If you are interested in using this feature, contact your account manager. Removes an association between a branch network interface with a t...

Disassociates a CIDR block from a VPC. To disassociate the CIDR block, you must specify its association ID. You can get the association ID by using DescribeVpcs. You must detach or delete all gatew...

Enables Elastic IP address transfer. For more information, see Transfer Elastic IP addresses in the Amazon Virtual Private Cloud User Guide.

Enables Infrastructure Performance subscriptions.

Enables EBS encryption by default for your account in the current Region. After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default KMS ...

When you enable faster launching for a Windows AMI, images are pre-provisioned, using snapshots to launch instances up to 65% faster. To create the optimized Windows image, Amazon EC2 launches an i...

Enables fast snapshot restores for the specified snapshots in the specified Availability Zones. You get the full benefit of fast snapshot restores after they enter the enabled state. To get the cur...

Enables deprecation of the specified AMI at the specified date and time. For more information, see Deprecate an AMI in the Amazon EC2 User Guide.

Enable an Organizations member account as the IPAM admin account. You cannot select the Organizations management account as the IPAM admin account. For more information, see Enable integration with...

Establishes a trust relationship between Reachability Analyzer and Organizations. This operation must be performed by the management account for the organization. After you establish a trust relati...

Enables access to the EC2 serial console of all instances for your account. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account acces...

Enables the specified attachment to propagate routes to the specified propagation route table.

Enables a virtual private gateway (VGW) to propagate routes to the specified route table of a VPC.

Enables I/O operations for a volume that had I/O operations disabled because the data on the volume was potentially inconsistent.

We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon Elastic Compute Cloud User Guide. E...

Downloads the client certificate revocation list for the specified Client VPN endpoint.

Downloads the contents of the Client VPN endpoint configuration file for the specified Client VPN endpoint. The Client VPN endpoint configuration file includes the Client VPN endpoint and certifica...

Exports an Amazon Machine Image (AMI) to a VM file. For more information, see Exporting a VM directly from an Amazon Machine Image (AMI) in the VM Import/Export User Guide.

Exports routes from the specified transit gateway route table to the specified S3 bucket. By default, all routes are exported. Alternatively, you can filter by CIDR range. The routes are saved to t...

Returns the IAM roles that are associated with the specified ACM (ACM) certificate. It also returns the name of the Amazon S3 bucket and the Amazon S3 object key where the certificate, certificate ...

Gets information about the IPv6 CIDR block associations for a specified IPv6 address pool.

Gets network performance data.

Gets usage information about a Capacity Reservation. If the Capacity Reservation is shared, it shows usage information for the Capacity Reservation owner and each Amazon Web Services account that i...

Describes the allocations from the specified customer-owned address pool.

Gets the console output for the specified instance. For Linux instances, the instance console output displays the exact console output that would normally be displayed on a physical monitor attache...

Retrieve a JPG-format screenshot of a running instance to help with troubleshooting. The returned content is Base64-encoded.

Describes the default credit option for CPU usage of a burstable performance instance family. For more information, see Burstable performance instances in the Amazon EC2 User Guide.

Describes the default KMS key for EBS encryption by default for your account in this Region. You can change the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsD...

Describes whether EBS encryption by default is enabled for your account in the current Region. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.

Generates a CloudFormation template that streamlines and automates the integration of VPC flow logs with Amazon Athena. This make it easier for you to query and gain insights from VPC flow logs dat...

Lists the resource groups to which a Capacity Reservation has been added.

Preview a reservation purchase with configurations that match those of your Dedicated Host. You must have active Dedicated Hosts in your account before you purchase a reservation. This is a preview...

Returns a list of instance types with the specified instance attributes. You can use the response to preview the instance types without launching instances. Note that the response does not consider...

A binary representation of the UEFI variable store. Only non-volatile variables are stored. This is a base64 encoded and zlib compressed binary value that must be properly encoded. When you use reg...

Retrieve historical information about a CIDR within an IPAM scope. For more information, see View the history of IP addresses in the Amazon VPC IPAM User Guide.

Gets IPAM discovered accounts. A discovered account is an Amazon Web Services account that is monitored under a resource discovery. If you have integrated IPAM with Amazon Web Services Organization...

Returns the resource CIDRs that are monitored as part of a resource discovery. A discovered resource is a resource CIDR monitored under a resource discovery. The following resources can be discover...

Get a list of all the CIDR allocations in an IPAM pool. If you use this action after AllocateIpamPoolCidr or ReleaseIpamPoolAllocation, note that all EC2 API actions follow an eventual consistency ...

Get the CIDRs provisioned to an IPAM pool.

Returns resource CIDRs managed by IPAM in a given scope. If an IPAM is associated with more than one resource discovery, the resource CIDRs across all of the resource discoveries is returned. A res...

Retrieves the configuration data of the specified instance. You can use this data to create a launch template. This action calls on other describe actions to get instance information. Depending on ...

Gets information about the resources that are associated with the specified managed prefix list.

Gets information about the entries for a specified managed prefix list.

Gets the findings for the specified Network Access Scope analysis.

Gets the content for the specified Network Access Scope.

Retrieves the encrypted administrator password for a running Windows instance. The Windows password is generated at boot by the EC2Config service or EC2Launch scripts (Windows Server 2016 and later...

Returns a quote and exchange information for exchanging one or more specified Convertible Reserved Instances for a new Convertible Reserved Instance. If the exchange cannot be performed, the reason...

Retrieves the access status of your account to the EC2 serial console of all instances. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage a...

Calculates the Spot placement score for a Region or Availability Zone based on the specified target capacity and compute requirements. You can specify your compute requirements either by using Inst...

Gets information about the subnet CIDR reservations.

Lists the route tables to which the specified resource attachment propagates routes.

Gets information about the associations for the transit gateway multicast domain.

Gets a list of the transit gateway policy table associations.

Returns a list of transit gateway policy table entries.

Gets information about the prefix list references in a specified transit gateway route table.

Gets information about the associations for the specified transit gateway route table.

Gets information about the route table propagations for the specified transit gateway route table.

Get the Verified Access policy associated with the endpoint.

Shows the contents of the Verified Access policy associated with the group.

Download an Amazon Web Services-provided sample configuration file to be used with the customer gateway device specified for your Site-to-Site VPN connection.

Obtain a list of customer gateway devices for which sample configuration files can be provided. The request has no additional parameters. You can also see the list of device types with sample confi...

Get details of available tunnel endpoint maintenance.

Uploads a client certificate revocation list to the specified Client VPN endpoint. Uploading a client certificate revocation list overwrites the existing client certificate revocation list. Uploadi...

To import your virtual machines (VMs) with a console-based experience, you can use the Import virtual machine images to Amazon Web Services template in the Migration Hub Orchestrator console. For ...

Creates an import instance task using metadata from the specified disk image. This API action supports only single-volume VMs. To import multi-volume VMs, use ImportImage instead. This API action i...

Imports the public key from an RSA or ED25519 key pair that you created with a third-party tool. Compare this with CreateKeyPair, in which Amazon Web Services creates the key pair and gives the key...

Imports a disk into an EBS snapshot. For more information, see Importing a disk as a snapshot using VM Import/Export in the VM Import/Export User Guide.

Creates an import volume task using metadata from the specified disk image. This API action supports only single-volume VMs. To import multi-volume VMs, use ImportImage instead. To import a disk to...

Lists one or more AMIs that are currently in the Recycle Bin. For more information, see Recycle Bin in the Amazon EC2 User Guide.

Lists one or more snapshots that are currently in the Recycle Bin.

Modifies an attribute of the specified Elastic IP address. For requirements, see Using reverse DNS for email applications.

Changes the opt-in status of the Local Zone and Wavelength Zone group for your account. Use DescribeAvailabilityZones to view the value for GroupName.

Modifies a Capacity Reservation's capacity and the conditions under which it is to be released. You cannot change a Capacity Reservation's instance type, EBS optimization, instance store settings, ...

Modifies a Capacity Reservation Fleet. When you modify the total target capacity of a Capacity Reservation Fleet, the Fleet automatically creates new Capacity Reservations, or modifies or cancels e...

Modifies the specified Client VPN endpoint. Modifying the DNS server resets existing client connections.

Modifies the default credit option for CPU usage of burstable performance instances. The default credit option is set at the account level per Amazon Web Services Region, and is specified per insta...

Changes the default KMS key for EBS encryption by default for your account in this Region. Amazon Web Services creates a unique Amazon Web Services managed KMS key in each Region for use with encry...

Modifies the specified EC2 Fleet. You can only modify an EC2 Fleet request of type maintain. While the EC2 Fleet is being modified, it is in the modifying state. To scale up your EC2 Fleet, increas...

Modifies the specified attribute of the specified Amazon FPGA Image (AFI).

Modify the auto-placement setting of a Dedicated Host. When auto-placement is enabled, any instances that you launch with a tenancy of host but without a specific host ID are placed onto any availa...

Modifies the ID format of a resource for a specified IAM user, IAM role, or the root user for an account; or all IAM users, IAM roles, and the root user for an account. You can specify that resourc...

Modifies the ID format for the specified resource on a per-Region basis. You can specify that resources should receive longer IDs (17-character IDs) when they are created. This request can only be ...

Modifies the specified attribute of the specified AMI. You can specify only one attribute at a time. To specify the attribute, you can use the Attribute parameter, or one of the following parameter...

Modifies the specified attribute of the specified instance. You can specify only one attribute at a time. Note: Using this action to change the security groups associated with an elastic network in...

Modifies the Capacity Reservation settings for a stopped instance. Use this action to configure an instance to target a specific Capacity Reservation, run in any open Capacity Reservation with matc...

Modifies the credit option for CPU usage on a running or stopped burstable performance instance. The credit options are standard and unlimited. For more information, see Burstable performance insta...

Modifies the start time for a scheduled Amazon EC2 instance event.

Modifies the specified event window. You can define either a set of time ranges or a cron expression when modifying the event window, but not both. To modify the targets associated with the event w...

Modifies the recovery behavior of your instance to disable simplified automatic recovery or set the recovery behavior to default. The default configuration will not enable simplified automatic reco...

Modify the instance metadata parameters on a running or stopped instance. When you modify the parameters on a stopped instance, they are applied when the instance is started. When you modify the pa...

Modifies the placement attributes for a specified instance. You can do the following: Modify the affinity between an instance and a Dedicated Host. When affinity is set to host and the instance is ...

Modify the configurations of an IPAM.

Modify the configurations of an IPAM pool. For more information, see Modify a pool in the Amazon VPC IPAM User Guide.

Modify a resource CIDR. You can use this action to transfer resource CIDRs between scopes and ignore resource CIDRs that you do not want to manage. If set to false, the resource will not be tracked...

Modifies a resource discovery. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Modify an IPAM scope.

Modifies a launch template. You can specify which version of the launch template to set as the default version. When launching an instance, the default version applies when a launch template versio...

Modifies the specified local gateway route.

Modifies the specified managed prefix list. Adding or removing entries in a prefix list creates a new version of the prefix list. Changing the name of the prefix list does not affect the version. I...

Modifies the specified network interface attribute. You can specify only one attribute at a time. You can use this action to attach and detach security groups from an existing EC2 instance.

Modifies the options for instance hostnames for the specified instance.

Modifies the configuration of your Reserved Instances, such as the Availability Zone, instance count, or instance type. The Reserved Instances to be modified must be identical, except for Availabil...

Modifies the rules of a security group.

Adds or removes permission settings for the specified snapshot. You may add or remove specified Amazon Web Services account IDs from a snapshot's list of create volume permissions, but you cannot d...

Archives an Amazon EBS snapshot. When you archive a snapshot, it is converted to a full snapshot that includes all of the blocks of data that were written to the volume at the time the snapshot was...

Modifies the specified Spot Fleet request. You can only modify a Spot Fleet request of type maintain. While the Spot Fleet request is being modified, it is in the modifying state. To scale up your ...

Modifies a subnet attribute. You can only modify one attribute at a time. Use this action to modify subnets on Amazon Web Services Outposts. To modify a subnet on an Outpost rack, set both MapCusto...

Allows or restricts mirroring network services. By default, Amazon DNS network services are not eligible for Traffic Mirror. Use AddNetworkServices to add network services to a Traffic Mirror filte...

Modifies the specified Traffic Mirror rule. DestinationCidrBlock and SourceCidrBlock must both be an IPv4 range or an IPv6 range.

Modifies a Traffic Mirror session.

Modifies the specified transit gateway. When you modify a transit gateway, the modified options are applied to new transit gateway attachments only. Your existing transit gateway attachments are no...

Modifies a reference (route) to a prefix list in a specified transit gateway route table.

Modifies the specified VPC attachment.

Modifies the configuration of an Amazon Web Services Verified Access endpoint.

Modifies the specified Verified Access endpoint policy.

Modifies the specified Verified Access group configuration.

Modifies the specified Verified Access group policy.

Modifies the configuration of the specified Verified Access instance.

Modifies the logging configuration for the specified Amazon Web Services Verified Access instance.

Modifies the configuration of the specified Amazon Web Services Verified Access trust provider.

You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you mig...

Modifies a volume attribute. By default, all I/O operations for the volume are suspended when the data on the volume is determined to be potentially inconsistent, to prevent undetectable, latent da...

Modifies the specified attribute of the specified VPC.

Modifies attributes of a specified VPC endpoint. The attributes that you can modify depend on the type of VPC endpoint (interface, gateway, or Gateway Load Balancer). For more information, see the ...

Modifies a connection notification for VPC endpoint or VPC endpoint service. You can change the SNS topic for the notification, or the events for which to be notified.

Modifies the attributes of your VPC endpoint service configuration. You can change the Network Load Balancers or Gateway Load Balancers for your service, and you can specify whether acceptance is r...

Modifies the payer responsibility for your VPC endpoint service.

Modifies the permissions for your VPC endpoint service. You can add or remove permissions for service consumers (Amazon Web Services accounts, users, and IAM roles) to connect to your endpoint serv...

We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon Elastic Compute Cloud User Guide. M...

Modifies the instance tenancy attribute of the specified VPC. You can change the instance tenancy attribute of a VPC to default only. You cannot change the instance tenancy attribute to dedicated. ...

Modifies the customer gateway or the target gateway of an Amazon Web Services Site-to-Site VPN connection. To modify the target gateway, the following migration options are available: An existing v...

Modifies the connection options for your Site-to-Site VPN connection. When you modify the VPN connection options, the VPN endpoint IP addresses on the Amazon Web Services side do not change, and th...

Modifies the VPN tunnel endpoint certificate.

Modifies the options for a VPN tunnel in an Amazon Web Services Site-to-Site VPN connection. You can modify multiple options for a tunnel in a single request, but you can only modify one tunnel at ...

Enables detailed monitoring for a running instance. Otherwise, basic monitoring is enabled. For more information, see Monitor your instances using CloudWatch in the Amazon EC2 User Guide. To disabl...

Moves an Elastic IP address from the EC2-Classic platform to the EC2-VPC platform. The Elastic IP address must be allocated to your account for more than 24 hours, and it must not be associated wit...

Move a BYOIPv4 CIDR to IPAM from a public IPv4 pool. If you already have a BYOIPv4 CIDR with Amazon Web Services, you can move the CIDR to IPAM from a public IPv4 pool. You cannot move an IPv6 CIDR...

Provisions an IPv4 or IPv6 address range for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address rang...

Provision a CIDR to an IPAM pool. You can use this action to provision new CIDRs to a top-level pool or to transfer a CIDR from a top-level pool to a pool within it. For more information, see Provi...

Provision a CIDR to a public IPv4 pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide.

Purchase a reservation with configurations that match those of your Dedicated Host. You must have active Dedicated Hosts in your account before you purchase a reservation. This action results in th...

Purchases a Reserved Instance for use with your account. With Reserved Instances, you pay a lower hourly rate compared to On-Demand instance pricing. Use DescribeReservedInstancesOfferings to get a...

You can no longer purchase Scheduled Instances. Purchases the Scheduled Instances with the specified schedule. Scheduled Instances enable you to purchase Amazon EC2 compute capacity by the hour f...

Requests a reboot of the specified instances. This operation is asynchronous; it only queues a request to reboot the specified instances. The operation succeeds if the instances are valid and belon...

Registers an AMI. When you're creating an AMI, this is the final step you must complete before you can launch an instance from the AMI. For more information about creating AMIs, see Create your own...

Registers a set of tag keys to include in scheduled event notifications for your resources. To remove tags, use DeregisterInstanceEventNotificationAttributes.

Registers members (network interfaces) with the transit gateway multicast group. A member is a network interface associated with a supported EC2 instance that receives multicast traffic. For inform...

Registers sources (network interfaces) with the specified transit gateway multicast group. A multicast source is a network interface attached to a supported instance that sends multicast traffic. F...

Rejects a request to associate cross-account subnets with a transit gateway multicast domain.

Rejects a transit gateway peering attachment request.

Rejects a request to attach a VPC to a transit gateway. The VPC attachment must be in the pendingAcceptance state. Use DescribeTransitGatewayVpcAttachments to view your pending VPC attachment reque...

Rejects VPC endpoint connection requests to your VPC endpoint service.

Rejects a VPC peering connection request. The VPC peering connection must be in the pending-acceptance state. Use the DescribeVpcPeeringConnections request to view your outstanding VPC peering conn...

Releases the specified Elastic IP address. [EC2-Classic, default VPC] Releasing an Elastic IP address automatically disassociates it from any instance that it's associated with. To disassociate an ...

When you no longer want to use an On-Demand Dedicated Host it can be released. On-Demand billing is stopped and the host goes into released state. The host ID of Dedicated Hosts that have been rele...

Release an allocation within an IPAM pool. You can only use this action to release manual allocations. To remove an allocation for a resource without deleting the resource, set its monitored state ...

Replaces an IAM instance profile for the specified running instance. You can use this action to change the IAM instance profile that's associated with an instance without having to disassociate the...

Changes which network ACL a subnet is associated with. By default when you create a subnet, it's automatically associated with the default network ACL. For more information, see Network ACLs in the...

Replaces an entry (rule) in a network ACL. For more information, see Network ACLs in the Amazon Virtual Private Cloud User Guide.

Replaces an existing route within a route table in a VPC. You must specify either a destination CIDR block or a prefix list ID. You must also specify exactly one of the resources from the parameter...

Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route ...

Replaces the specified route in the specified transit gateway route table.

Trigger replacement of specified VPN tunnel.

Submits feedback about the status of an instance. The instance must be in the running state. If your experience with the instance differs from the instance status returned by DescribeInstanceStatus...

Creates a Spot Fleet request. The Spot Fleet request specifies the total target capacity and the On-Demand target capacity. Amazon EC2 calculates the difference between the total capacity and On-De...

Creates a Spot Instance request. For more information, see Spot Instance requests in the Amazon EC2 User Guide for Linux Instances. We strongly discourage using the RequestSpotInstances API because...

Resets the attribute of the specified IP address. For requirements, see Using reverse DNS for email applications.

Resets the default KMS key for EBS encryption for your account in this Region to the Amazon Web Services managed KMS key for EBS. After resetting the default KMS key to the Amazon Web Services mana...

Resets the specified attribute of the specified Amazon FPGA Image (AFI) to its default value. You can only reset the load permission attribute.

Resets an attribute of an AMI to its default value.

Resets an attribute of an instance to its default value. To reset the kernel or ramdisk, the instance must be in a stopped state. To reset the sourceDestCheck, the instance can be either running or...

Resets a network interface attribute. You can specify only one attribute at a time.

Resets permission settings for the specified snapshot. For more information about modifying snapshot permissions, see Share a snapshot in the Amazon Elastic Compute Cloud User Guide.

Restores an Elastic IP address that was previously moved to the EC2-VPC platform back to the EC2-Classic platform. You cannot move an Elastic IP address that was originally allocated for use in EC2...

Restores an AMI from the Recycle Bin. For more information, see Recycle Bin in the Amazon EC2 User Guide.

Restores the entries from a previous version of a managed prefix list to a new version of the prefix list.

Restores a snapshot from the Recycle Bin. For more information, see Restore snapshots from the Recycle Bin in the Amazon Elastic Compute Cloud User Guide.

Restores an archived Amazon EBS snapshot for use temporarily or permanently, or modifies the restore period or restore type for a snapshot that was previously temporarily restored. For more informa...

Removes an ingress authorization rule from a Client VPN endpoint.

[VPC only] Removes the specified outbound (egress) rules from a security group for EC2-VPC. This action does not apply to security groups for use in EC2-Classic. You can specify rules using either ...

Removes the specified inbound (ingress) rules from a security group. You can specify rules using either rule IDs or security group rule properties. If you use rule properties, the values that you s...

Launches the specified number of instances using an AMI for which you have permissions. You can specify a number of options, or leave the default options. The following rules apply: [EC2-VPC] If yo...

Launches the specified Scheduled Instances. Before you can launch a Scheduled Instance, you must purchase it and obtain an identifier using PurchaseScheduledInstances. You must launch a Scheduled I...

Searches for routes in the specified local gateway route table.

Searches one or more transit gateway multicast groups and returns the group membership information.

Searches for routes in the specified transit gateway route table.

Sends a diagnostic interrupt to the specified Amazon EC2 instance to trigger a kernel panic (on Linux instances), or a blue screen/stop error (on Windows instances). For instances based on Intel an...

Starts an Amazon EBS-backed instance that you've previously stopped. Instances that use Amazon EBS volumes as their root devices can be quickly stopped and started. When an instance is stopped, the...

Starts analyzing the specified Network Access Scope.

Starts analyzing the specified path. If the path is reachable, the operation returns the shortest feasible path.

Initiates the verification process to prove that the service provider owns the private DNS name domain for the endpoint service. The service provider must successfully perform the verification befo...

Stops an Amazon EBS-backed instance. For more information, see Stop and start your instance in the Amazon EC2 User Guide. You can use the Stop action to hibernate an instance if the instance is ena...

Terminates active Client VPN endpoint connections. This action can be used to terminate a specific client connection, or up to five connections established by a specific user.

Shuts down the specified instances. This operation is idempotent; if you terminate an instance more than once, each call succeeds. If you specify multiple instances and the request fails (for examp...

Unassigns one or more IPv6 addresses IPv4 Prefix Delegation prefixes from a network interface.

Unassigns one or more secondary private IP addresses, or IPv4 Prefix Delegation prefixes from a network interface.

Unassigns secondary private IPv4 addresses from a private NAT gateway. You cannot unassign your primary private IP. For more information, see Edit secondary IP address associations in the Amazon Vi...

Disables detailed monitoring for a running instance. For more information, see Monitoring your instances and volumes in the Amazon EC2 User Guide.

VPC only Updates the description of an egress (outbound) security group rule. You can replace an existing description, or add a description to a rule that did not have one previously. You can remov...

Updates the description of an ingress (inbound) security group rule. You can replace an existing description, or add a description to a rule that did not have one previously. You can remove a descr...

Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. It c...

Operations